Find Vane Damper Roll Forming Machine, Tile Roll Forming Machine, Damper Shell Molding Machine on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Vane Damper Roll Forming Machine > Fire Shutter Frame Fsd Frame Roll Forming Machine Manufacturer Saudi

Fire Shutter Frame Fsd Frame Roll Forming Machine Manufacturer Saudi

Basic Info

Model No.:  BOSJ-V

Product Description

Model NO.: BOSJ-V Forging Forming Method: Mold Forging Feature: Automation Warranty: 18 Months Advantage: Easy to Maintenance Place of Origin: Jiangsu, China (Mainland Material of Roller: Gcr 15 Origin: Jiangsu China Type: Rolling Machine Power Source: Hydraulic Pressure Certification: SGS, ISO9001 Customized: Customized Condition: New Usage: Multifunctional Trademark: BOSJ HS Code: 8455212000

Automatic Fire Smoke Damper Roll Forming Machine

Technical Parameters:
Equipment technique requirement:
Equipment floor space: 23×3.0×2.5(L×W×H)meter. 
Equipment feeding material the orientation: The left side enter and right leave.
Voltage: 380V,50Hz,3phase.
Hydraulic oil : NO: .46#
Gear oil: 18# Hypoid dear oil
Equipment main technical parameters:
Raw material width: around 196 mm
Material thickness: G.I=0.7~1.2mm
Material: Galvanized and stainless sheet 
Production speed: around 6M/min
Production length: ≥3000mm
Equipment total installed capacity: Around 20KW.
Roll forming production scope
This rollforming machine can be make the thickness from 0.8mm to 1.2mm
Parameters of main equipment:
1 - De-coiler
Material width:≤250 mm, Material thickness≤2.0mm;
Inner diameter:480-520 mm;
Outer diamete:φ1200mm;
Max. Load capacity:≤2T
2 - Leveling system
Use 9 roller leveling,
Power 2.2 kW,
Speed: 10M/min
3 - Servo feeding system
BNC-30Technical parameters:
BNC-300
The feed shaft diameter:φ60mm
Measuring diameter of shaft:φ60mm
Maximum feed plate of width:≤300mm
Maximum feed plate of thickness:≤2.5mm
Maximum feed speed:≤40m/min
Feeding and blanking step length tolerance:±0.20mm
Feed products overall length tolerance:±0.25mm
Servo motor power/brand:1.3KW/Japan Yaskawa
TransmissionSynchronous wheel / gear
Length measuring encoder: ROUNDSS 2500P
4- Notching, punching hole and cutting
Structure: hydraulic punching structure,the welded steel frame, has good inflexibility
First notching dies: 2 sets
First punching die:1 set
After forming notching dies:2 sets
After forming cutting die:1set
5 - Main rollforming machine
Forming steps:14 group
Forming framework: use the wall type side plategear drive
Side wall thickness:25mm
Max material width:≤196mm  
Min material thickness:0.7mm 
The roll shaft diameter:φ48 mm  
Roller material:Cr12MoV,the quenching hardness,HRC58-62°
Use of double bearing design, bearing type 6208
The main drive motor uses 5.5kw frequency conversion motor.
6 - Cutting system
a.ModalityHydraulic cutting
b.Design featureafter cutting system design in the Forming Machine, the cutting Length can be set.
7 - Run-out table
Framework: platform typewithout power
8 - Electrical control system
  1-The whole line adopts PLC control, LCD touch screen display and man-machine interface software. (Interaction between workers and PLC.)
The operator can do the following
The setting program (PLC)
Monitoring the control process,
Modify the control parameters,
The length of the workpiece digital setting,
The length of the workpiece adjusting.
Running state real-time monitoring equipment and fault indication.
  2- Mode of operation: manual / auto two. With manual, automatic switching function: in the manual mode, can be stand-alone operation, convenient repair; in the automatic mode, all production and operation, the start up sequence; along with the emergency stop button, easy to handle emergencies, to ensure the safety of equipment and personnel.


NO.

Project

Unit

parameters

Remark

1

Material
type
Mild steel Galvanized sheet
Strength of material sheet Map ≥350
Thickness of material sheet mm 0.8~1.5
2 Size of production
 
mm       
Reference the picture

3 Production speed m/min 6~8
4 Material of roller
GCr quenching treatment
 

5 Drive type
Gear box
6 Power kw About 34
7 Electric control system
PLC variable frequency control
8 Dimensions(Length*width*height)

 
m 28X4X3.9

Contact us if you need more details on Roll Forming. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Fire Damper Roll Forming Machine、Vane Damper Roll Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Vane Damper Roll Forming Machine

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters