Steel Roller Shutter Roll Forming Machine Supplier
Model No.: BOSJ-S
De-coiler --- Roll forming --- correction device --- punching device --- cutting-to-length --- collection table
1, Coil width 100-300mm,
2, Coil thickness 0.8-1.2mm
3, Production speed 0-10m/min
4, Total power about 20 kw
5, Operation area length 18m x width 3m
6, Power 380V/415V, 50Hz
EQUIPMENT / TECHNICAL PARAMETERS
Main characteristics: / :
- old formed and galvanised steel sheet in coils: elongation shall be minimum of 16 %; yield strength 240 - 420 N/mm2 ; thickness of metal 0,72,0 mm.; width of a strip up to 300 mm. / : 16%; 240-420 /2 ; 0,72,0 .; 300 .;
-Production speed: 0-20m/mim. / 0-20/;
-Power source AC380V, 50Hz, 3P / AC380 B, 50, 3;
-Total power about 17,5kW / 17,5 .
-Machine Dimension /
-Machine Net weight/
-Machine Gross Weight/
Each component description: / :
-Passive decoiler: capacity-2t., inner expansion 520-620 mm, with brake./ : 2 , 520-620 ., .
- Guide roller device / ;
- straightener device - 9 rollers / -9
-The roll-forming machine with 3 sets of the fast exchangeable cassettes; 10 stations, every rack has one separate gear power distribution unit; main power: 1 piece of the motor 11 kw K-type vertical installation; diameter of shafts -60 mm., material: 40Cr quenching treatment HB280. Material of the forming rollers GCr15, hardness HRC58-60. Quick-detachable coupling between the reducers and roll-forming shafts. Supports for all cassette frames / 3 ; 10 ; ; : 1 - 11; 60, 40, HB280; GCr15, HRC58-60. . .
- Correction device (three-dimensional emendation) / ( )
- Hydraulic cutting device of the flying type, 3 cutting blades, to cut with a waste, hydraulic cylinder has a double action. There is a pneumatic cylinder for moving the cutting device. Working in the start-stop and fly cutting mode.
Material of the cutting blades - Cr12, Quenching, Hardness:HRC58-62.
The tolerance of cut to length ±2,0 mm on length 6,0 m. /
, 3 , , . . - . Cr12, , HRC58-62. ±2,0 6,0 .
- Hydraulic power station - 5.5 kw. / -5,5 .
- Run out rollers table - 4+4 m. / - 4+4 .
- Electronic control system PLC
- The painting color of the machine is blue (RAL 5012) / - (RAL 5012).
Order queue (product length and quantity of pieces) is defined via operator panel. The operator can enter several batches (length and quantity of pieces of the same type) at a time into the control unit.
( ) . ( ) .
- Manufacturing facility, country; JIANGSU,CHINA
- Date of the manufacturing;13,April,2014
-Machine Dimension / length 18m x width1.7mxHeight 1.5m
-Machine Net weight/ 12500KGS
-Machine Gross Weight/ 13000KGS
|Suitable raw materials ||Type||Mild steel, galvanized sheet|
|Plate strength ||Map||≥350|
See the pictures
|4||Material of the roller||GCr15,Hardening treatment|
|5||drive type||Cast steel frame, |
|7||Electrical control system||PCL frequency control|
Contact us if you need more details on Roller Shutter Roll Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Roll Forming Machine、Roll Forming. If these products fail to match your need, please contact us and we would like to provide relevant information.
Premium Related Products